Denecke PS-T Regulated 12v T-Power Microphone Power Supply
Denecke's Dcode PS-T Microphone Power Supply is a low noise 12V parallel or T power supply that feeds a broad range of condenser mics. In addition to -15dB pad, it uniquely features a polarity reversal switch for powering older red dot mics.
A single 9V battery can run a high current microphone for up to 24 hours. Small, rugged, and light weight construction makes the PS-T perfect for mobile applications. A noise floor under 0.01 mVAC also suits it for mics feeding DAT machines, radio mics, tape machines, and mixing panels.
Support for Red Dot Microphones
A unique polarity reversal feature lets you feed some older specialty mics with the PS-T. Red dot mics don't work under the usual T-Power scheme of sending positive current on XLR pin 2 and returning negative current via pin 3. The PS-T's Red Dot switch lets you reverse this relationship, so you can use these mics too.
Low Noise
With a noise floor under 0.01 mVAC, the PS-T sounds surprisingly quiet when the mic is capturing dead air.
Excellent Battery Performance
A single 9V battery can feed a high current mic up to 24 hours (results will vary with different mics). When you first put a battery in, the PS-T flashes to let you know it's okay. If the battery is weak, the LED lights and remains steady to warn of possible poor mic performance.
Pad Switch
The Microphone Power Supply offers -15 pad to boost the signal when mic performance is low or the signal is weak.
Rugged Construction
The Phantom Power Supply is made small but tough to handle use on the road as well as in the stud
Hire Equipment
We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.
Weekly Rental
For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.
Shipping
If shipping is required, we require a two day minimum hire period, with a travel day inbetween.
Cancellations
Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.
Insurance
Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".