Lectrosonics SRC + SSM Bundle: SRC Receiver (B2) + 2 x SSM Transmitters (B2) + SR-EXT Bottom Plate
This Bundle Includes:
- 1 x Lectrosonics SRC Dual-Channel Slot Mount ENG Receiver (B2 Band)
- 2 x Lectrosonics SSM Miniature Digital Hybrid Wireless Belt-Pack Transmitter
- 1 x Lectrosonics RX Slot Adapter SR-EXT Power Jack & 2 x TA3 Jacks
Lectrosonics SRC Dual-Channel Slot Mount ENG Receiver (B2 Band)
The SRc is an ultra-compact dual channel receiver built into a sturdy housing with adapters for video camera receiver slots and for stand-alone use. Digital Hybrid Wireless® technology provides superb, compandor-free audio quality and compatibility with other wireless systems. The RF performance is extremely stable over a very wide temperature range, making the receiver perfectly suited to the rough environmental conditions found in field production.
DSP compatibility modes allow the receiver to be used with a variety of Lectrosonics systems, other brands of wireless systems and with Lectrosonics IFB transmitters.
Features
- Fits camera “slots,” Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
- Tunes over a 75 MHz range* (3 blocks)
- Dual receiver design for two channels with phase switched diversity or single channel with ratio diversity operation
- Digital Hybrid Wireless® with compatibility modes for use with other transmitters
- Tracking front-end filters for high performance in tough RF environments
- LCD with RF spectrum scanning
- SmartSquelchTM DSP-controlled, noise based filtering and squelch
- DSP-based pilot tone for squelch control
- IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
- SmartTune operation for quick and confident frequency selection
Frequency range:
- B2 - 563-640 MHz or Blocks 22, 23 606 & 24
Lectrosonics SSM Miniature Digital Hybrid Wireless Belt-Pack Transmitter (B2 Band)
The SSM transmitter is ideal in theatrical or any other production where concealment in costuming is required. In spite of its tiny size, the transmitter offers an extensive feature set and performance on par with all of the Digital Hybrid Wireless® models.
Features
- Tunable across three standard frequency blocks (76.8 MHz)
- Digital Hybrid Wireless® audio for compandor-free digital quality
- High quality 3-Pin lemo connector for microphone input
- Selectable 25 or 50 mW RF power
- Compatibility modes for use with analog receivers
- 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
- Wide range input gain control in 1 dB steps
- Quick change Lithium-ion rechargeable battery
- Audio coupled remote control
Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations.
The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. Accurate LED indications on the keypad allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion. The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio, yet provide protection against input overload.
Compatibility with earlier analog Lectrosonics receivers, Lectrosonics IFB receivers and some receivers from other manufacturers is provided by DSP emulation modes selected in the LCD menu.
Frequency range:
LECTROSONICS SR EXT SR RECEIVER MOUNTING KIT FOR STAND ALONE OPERATION
The Lectrosonics SREXT is a connector panel adapter kit for the Lectrosonics SR Dual Slot-In Receiver. The kit is intended to provide the freedom of using the SR Receiver on standard, non slot-in mount scenarios. On the included connector panel are two TA3-male jacks for balanced output and a power jack with a locking connector. Supplied with a Hirose power cable.
Compatible with the Lectrosonics SRB/E01 Dual Channel Block 606 Receiver
SRC Specifications
Wireless Technology | Analog/Digital Hybrid UHF |
Number of RF Channel Frequencies | 3072 |
Diversity | Ratio Diversity, Smart Diversity |
RF Bandwidth | 76 MHz |
Frequency Step Size | 25 kHz 100 kHz |
RF Channel Scanning | Auto-Scan |
Control App Support | No |
Receiver Type | Slot-Mount |
Mounting Options | Shoe-Mount, Slot-Mount, 1/4"-20 Female (with Optional Hardware) |
Antenna | 2 x Flexible Whip, SMA (Top-Mount) |
Number of Audio Channels | 2 |
Audio I/O | None |
Slot-Mount I/O Adapters | Available Separately: DB-25 (Uni/SuperSlot), DE-15/DB-15 (Sony Type), TA3/Mini XLR, TA5/Mini XLR |
Gain Range | 20 to 60 dB |
Audio Output Level | -50 to +5 dB (Balanced) |
Frequency Response | 32 Hz to 20 kHz ±1 dB |
Impedance | Antenna: 50 Ohms |
RF Principle | Double Superheterodyne |
Approximate RF Sensitivity | -107 dB / 1 µV |
Squelch | 100 dBm |
Spurious | Rejection: 85 dB |
Power Requirements | AC/DC Power Adapter, Battery, DC Input |
Battery Type | 2 x 9V (with Optional Equipment) |
AC/DC Power Adapter | 12 VDC at 3 A (Not Included) |
DC Input Power | 7 to 18 VDC 18 VDC at 145mA 7 VDC at 290mA |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Display & Indicators | 1 x LCD (Battery Status, Level, Power, RF Level, Sync, Transmitter Battery Status) |
Operating Temperature | -4 to 122°F / -20 to 50°C |
Dimensions | 2.9 x 1.2 x 4.9" / 73.7 x 30.5 x 124.5 mm |
Weight | 7 oz / 198 g |
SSM Specifications
Frequency Selection Steps | Selectable; 100 kHz steps or 25 kHz |
RF Power Output | Switchable; 25 or 50 mW |
Pilot Tone | 25 to 32 kHz; 5 kHz deviation (Digital Hybrid mode) |
Frequency Stability | ± 0.002% |
Deviation | ± 75 kHz max. (Digital Hybrid mode) |
Spurious Radiation | 60 dB below carrier |
Equivalent Input Noise | -120 dBV, A-weighted |
Input Level | Nominal 2 to 300 mV, before limiting Greater than 1 V maximum, with limiting |
Input Impedance | Mic: 300 or 4.5 kOhms; selectable Line: Greater than 100 kOhms |
Input Limiter | DSP controlled, dual envelope "soft" limiter with greater than 30 dB range |
Gain Control Range | 44 dB; digital control |
Modulation Indicators | Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation |
Frequency Response | 35 Hz to 20 kHz (+/-1 dB) |
Low Frequency Roll-Off | -12 dB/octave; 70 Hz |
Total Harmonic Distortion (THD) | 0.2% (typical) |
Signal to Noise Ratio* | At Receiver Output: SmartNR Off: No limiting 103.5, w/limiting 108.0 SmartNR Normal: No limiting 107.0, w/limiting 111.5 SmartNR Full: No limiting 108.5, w/limiting 113.0 |
Controls | Side-panel membrane switches with LCD interface for power on/off and all setup and configuration controls Responds to remote commands from smartphones with 3rd party app. |
Audio Input Jack | LEMO 00 series 3-pin |
Antenna | Galvanized steel, flexible wire |
Batteries | Lithium-ion 3.7 V 1000 mAH NP50 battery pack |
Battery Life | 6 hours per charge |
Emission Standard | 180KF3E |
Dimensions | 2.3 x 1.5 x 0.56" (58.4 x 38 x 14.2 mm) |
Weight | 2.3 oz (65.2 g) including lithium battery pack |
*Note: The dual envelope ""soft"" limiter provides the handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB
Hire Equipment
We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.
Weekly Rental
For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.
Shipping
If shipping is required, we require a two day minimum hire period, with a travel day inbetween.
Cancellations
Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.
Insurance
Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".