Please note: We will be closed from the 23rd of December 2024. Orders placed after 3:30PM on the 20th will be shipped upon return on the 2nd of January 2025. Merry Christmas & A Happy New Year!
Please note: We will be closed from the 23rd of December 2024. Orders placed after 3:30PM on the 20th will be shipped upon return on the 2nd of January 2025. Merry Christmas & A Happy New Year!

Audioroot eSmart Li-48neo 14.4V 48Wh Smart Lithium Battery w/ OLED Display

£99.00 (£82.50 Exc. VAT)
(RRP: £124.00) You save: £25.00!
Out of stock
Audioroot eSmart Li-48neo 14.4V 48Wh Smart Lithium Battery w/ OLED Display
Audioroot eSmart Li-48neo 14.4V 48Wh Smart Lithium Battery w/ OLED Display
Audioroot eSmart Li-48neo 14.4V 48Wh Smart Lithium Battery w/ OLED Display

Audioroot eSmart Li-48neo 14.4V 48Wh Smart Lithium Battery w/ OLED Display

£99.00 (£82.50 Exc. VAT)
(RRP: £124.00) You save: £25.00!
Out of stock
Brand: AudiorootModel: eSmart Li-48neo
+
Key Features:
  • High energy density rechargeable li-ion battery
  • SMBUS compatible Impedance Track™ fuel gauge
  • Embedded OLED display
  • Industry standard 5-pin 'smart' connector
See More...
S-AUR-Li-48NEO
Information

Please note:

This item can ONLY be shipped to European countries that provide road service, but for security and safety reasons we will NOT be able to send via air-mail. Apologies for any inconvenience this may cause.

Audioroot eSmart Li-48neo 14.4V 48Wh Smart Lithium Battery w/ OLED Display

14.4V 48Wh Smart Lithium Battery with embedded OLED Display

This all new model has a built-in OLED display which allows real time display of the battery’s state of charge information. This helps users get precise information about a battery’s voltage, current draw, run time, etc… when connected to any type of equipment. This is very useful when connecting the battery to a piece of equipment or DC current distributor which is not SMBUS enabled.

Features

  • High energy density rechargeable li-ion battery
  • SMBUS compatible Impedance Track™ fuel gauge
  • Embedded OLED display
  • Industry standard 5-pin 'smart' connector

Operation of the embedded OLED display is fully automatic. When the battery is disconnected the OLED can be activated by shaking the battery allowing to check battery capacity, cycle count and pack temperature. When powering a device from the battery the OLED display turns on and displays real time state of charge information. Once the device is shut down or disconnected from the pack the OLED display shuts off.

When the battery is connected to a fully compatible SMBUS device the OLED will stay to save power and keep the SMBUS lines free.

Specifications

Specifications

Technology Lithium-ion
Nominal voltage 14.4V
Typical capacity 3350mAh
Minimum capacity 3100mAh
Operating voltage From 10V to 16.8V
Standard charging method Constant current, constant voltage (CC/CV) 1.625A until 16.8V
Standard discharging method Constant current (CC) 0.65A until 10V
Max charge current 3.25A
Max continuous discharge current 6.75A
Max charge voltage 16.8V
Operation temperature Charge: 10~45°C
Discharge: -20~60°C
Storage temperature 1 month: -20~50°C
3 months: -20~40°C
1 year: -20~20°C
Weight 240g
Dimensions 85.10 x 77.20 x 22.60 mm
Cell certification UN 38.3 / IEC 62133
Battery pack certification UN 38.3 / EMC / FCC / CB IEC62133 / RoHS / REACH
Cycle life The battery will remain at least 70% of its initial capacity after 500 cycles, where-else the battery is used in standard charging and discharging method, including 30 minutes rest after each charge and discharge.
OLED display information Battery pack remaining capacity (%)
Battery pack voltage (V)
Battery pack current draw (A)
Battery pack remaining time at rate (HH:MM)
Battery pack cycle count
Battery pack temperature (°C)
Battery pack status (charging or discharging)
Current threshold to activate the OLED 50mA (charging or discharging)

At T= 25°C, RH=65% +/-20% (unless otherwise specified) 

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers