Tentacle
Tentacle
Tentacle Sync changed the face of the filmmaking industry with their miniatute, bluetooth timecode sync generators.
- High quality custom timecode cables
- Made with high quality cable and connectors
- Individually designed for most cameras and recorders
- Can be made to order as soon as same day, per request
- Feed timecode into your Sony FX3 or FX30 camera
- From your Tentacle Sync SYNC E & ORIGINAL, TRACK E or TIMEBAR
- Compatible with Tentacle Sync ORIGINAL / SYNC E / TRACK E / TIMEBAR
- Length approximately 25 cm
-2.jpg)
-2(1).jpg)
-2(2).jpg)
-2(3).jpg)
-2(4).jpg)
-2(5).jpg)
- Now with Bluetooth 5.0 Syncing and improved battery life
- Control, sync, monitor and setup via phone or tablet using Bluetooth 5.0
- Super small and lightweight with built-in reference microphone
- Generates All SMPTE timecode rates or jam-sync to any external timecode source
- Slate add-on kit for the Tentacle Timebar
- Precision-engineered acrylic board with durable clapper sticks
- Custom-designed Timebar holder / mount
- Intergrate your existing Timebar seamlessly
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
- The same trusted Track E Timecode Audio Recorder
- No included lavalier microphone, fewer accessories and less packaging
- 32-bit Float Recording / 24-Bit Recording
- Up to 10 hours Operating Time
-1.jpg)
-1(1).jpg)
- 25 pieces of additional velcro loop pads for any Tentacle Sync device.
- Each velcro pad measures 4cm x 2.5cm
- This is a pack of 25
- Feed timecode to Sound Devices A20-Mini & A20-TX
- Compatible with any Tentacle SYNC E or ORIGINAL Timecode Generator
- Also any TRACK E Timecode Audio Recorder or TIMEBAR
- Syncs timecode via the A20's USB-C connector
.jpg)
.jpg)
- Battery Replacement Kit for the SYNC E (mk1/mk2) units
- Everything you need is included
- In order to replace your old built-in battery by yourself
- Precision-engineered acrylic board with durable clapper sticks
- Custom-designed TIMEBAR holder / mount
- High-contrast OLED technology with a wide viewing angle
- Typical battery runtime 24 hours
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Tentacle Sync Track E Basic Box Timecode Audio Recorder w/ Sanken COS-11 Lav Mic (3.5mm Jack) Bundle
- The same trusted Track E Timecode Audio Recorder
- No included lavalier microphone, fewer accessories and less packaging
- 32-bit Float Recording / 24-Bit Recording
- Up to 10 hours Operating Time
- Designed to connect 3-pin LEMO lavalier mics to a 3.5mm mic input
- For the TRACK E Timecode Audio Recorder from Tentacle Sync
- Connector 1: 1x 3-Pin LEMO, Connector 2: 1x 3.5mm Mini Jack
- Cable Length: 14 cm (End-to-End Length), Weight: 12 g
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Pack of 2 - Now with Bluetooth 5.0 Syncing and improved battery life
- Control, sync, monitor and setup via phone or tablet using Bluetooth 5.0
- Super small and lightweight with built-in reference microphone
- Generates All SMPTE timecode rates or jam-sync to any external timecode source
Load More