URSA Straps
URSA Straps
Legendary UK sound mixer Simon Bysshe and costume designer Laura Smith have created these industry standard accessories for mounting and hiding lavalier mics and radio mics.
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Soft Strips of stretchy moleskin applied to hypoallergenic sticky tape
- Great for reducing clothing rustle and camouflaging microphones.
- Comes in 3 different sizes to accommodate any application
- Available in 6 different colours. Even Chroma key Green or Blue
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
- URSA Pouches allow you to rig a transmitter vertically or horizontally
- Can be used with a to a belt or bra, or can be sewn or pinned into costumes
- Available in four sizes: Mini, Small, Medium & Large
- Available in three colours: Black, Beige & Beige
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- 12 Soft mini foam mounts for Lavalier mics
- Low profile mounts to reduce clothing noise.
- Designed for COS11, DPA 6060, 6061, Countryman B6 & Sennheiser MKE1
- Available in two colours: Black or White
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Designed for the DPA 6060 Series Lavalier Microphones
- Small, thin and low profile as possible & easy to mount
- Designed with an extremely smooth finish to minimize clothing noise
- Available in 4 different colours: Black, White, Beige and Brown
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
- Pre-cut and has a small peel-off tab for easy & fast use
- 24mm in diameter, see-through and very low profile at just 0.4mm
- Certified hypoallergenic so it can be used directly on skin
- Compatible with a variety of mic mounts including RM11s, DPA Concealers and more!
.jpg)
.jpg)
.jpg)
.jpg)
- They are 90 individual 24mm diameter pre-cut stickies with peel-off tabs
- As the name suggests these stickies are incredibly sticky!
- Good for when you need as much stick as possible
- Included with the URSA WireRig for securing this rig onto almost any surface
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- 12 Soft foam mounts for Lavalier mics
- Low profile mounts to reduce clothing noise.
- Designed for COS11, DPA 4060, 4071, Countryman B3 & Sennheiser ME2
- Available in 4 colours: Black, White, Beige & Brown
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Designed for the Sanken COS-11, also fits the Deity W.Lav Pro
- Small, thin and low profile as possible & easy to mount
- Designed with an extremely smooth finish to minimize clothing noise
- Available in 4 different colours: Black, White, Beige and Brown
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Form fitting shape wear with 3 built in pouches
- Comfortable, low profile & very handy under tight outfits
- Two pouches on the inner thighs and then one on the lower back
- Comes in three sizes (S, M, L) & two colours (Beige & Black)
- These versatile belts are 5cm wide by 115cm long
- Can be cut down with scissors to suit small waists.
- Designed for use with URSA's range of Belt Pouches
- Useful for performances where talent has to rig two transmitters onto one belt
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
- Fur Circles are reusable up to 4 or 5 times
- Can be stuck directly to skin or clothes
- 25mm diameter, re-useable & super soft
- Low profile lav cover creates less of a lump under costumes
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Designed for the DPA 4060 series, also fits Countryman B3 (w/ a cap)
- Small, thin and low profile as possible & easy to mount
- Designed with an extremely smooth finish to minimize clothing noise
- Available in 4 different colours: Black, White, Beige and Brown
Load More