Receiver Accessories
- Designed to carry and protect any sensitive equipment on location
- Can store dual wireless systems, small on camera lights, connectors and more
- Hard shell thermoforming case for maximum protection
- Elastics straps to secure the wireless systems inside the case
- A standard 3.5mm locking minj-jack and unbalanced XLR male connections
- Specifically designed for connecting the Evolution series portable EK receivers
- to the audio inputs on Beta Cameras, mixers, amplifiers, etc.
- Length: Approx. 60cm
- Zaxcom ERX rubber knobs for the ERX potentiometer
- Available as a set of 8 colours, all except black
- And separately, black white, brown, red, orange, yellow, green, blue and purple
- 450 – 900Mhz UHF ultra-flexible whip antenna
- Memory steel resistant to permanent bends
- Various different styles of connector to suit your needs
- SMA, SSMA, SMAR, SMA Swivel, 1-Pin Lemo
- The Lectrosonics SREXT is a connector panel adapter kit
- Provides freedom of using the SR Receiver on standard, non slot-in mount scenarios
- Two TA3-male jacks for balanced output and a power jack with a locking connector
- Compatible with the Lectrosonics SRB/E01 Dual Channel Block 606 Receiver
- Designed for the EW G2, G3 & G4 series bodypack transmitters
- Enables power from an external 12DC power source
- Connection: Bare ends or 4-Pin Hirose
- Cable length: Approximately 50cm
- Large Waist strap lengths are from 95cm to 128cm (37 to 50 Inches)
- Designed to fit most popular transmitters with the option of a small and big pouch
- Unique polyurethane gripper keeps the strap from slipping
- Built-in cable pocket secures your looped cable
- Compatible with: Adapter (Ambient VSLOT)
- SuperSlot mixers (i.e. Sound Devices 668/SL-6, Six Pack of PSC)
- Unislot (Ikegami, Panasonic cameras)
- Features a DB 25(M) Connector with 0dB Attenuation
- The Wisycom BPA54 is a “Stand alone” rear panel for the MCR54
- 1 x 4-Pin Hirose connector for external power
- 2 x TA5-M outputs for 4 analogue channels or 4 digital AES channels
- Replacement belt clip for a handful of Zaxcom products.
- TRX900LT / TRX900LA / TRXLA / TRXFB transmitters
- ERX receivers
- ZFR200 / ZFR300 recorders
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most aquapac cases, it’ll float if you drop it in the drink
- Use all buttons and switches through the case
- Like most of our cases it'll float if you drop it in the drink
- Feed out a wire of up to 2.5mm diameter from the case
- The seams are high-frequency welded to form a super-strong bond
Load More
Featured Radio Mics
- Low-noise, studio-grade balanced input for microphones and line level inputs
- Integrated digital audio recorder with ultra-accurate timecode generator
- Records to removable microSD cards
- Simultaneous wireless transmission and recording
- Digital Hybrid Wireless® with compatibility modes for use with other transmitters
- Tracking front-end filters for high performance in tough RF environments
- SmartSquelchTM DSP-controlled, noise based filtering and squelch
- IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
- Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage.
- Easy and flexible wireless synchronization between transmitter and receiver via infrared.
- Compatible with Sennheiser WSM control software for flexible frequency allocation.
- Up to 16 compatible channels.
- Accepts up to four, two-channel wireless receivers
- Audio output on analogue/AES3 and Dante
- Built-in power distribution & antenna distribution
- Compatible with select Audio Ltd, Lectrosonics & Wisycom
- Worldwide tuning range of 470MHz – 1525MHz with the A20-RX
- Full remote control of the Mini via A20-Remote companion app
- Full 10 Hz – 20 kHz audio bandwidth; 100% digital RF modulation and transmission
- Built-in 32-bit float, 48kHz recorder w/ 64GB storage for 80~ hours of record time