Schoeps CCM 21 L Wide Cardioid Compact Microphone

£1,440.00 (£1,200.00 Exc. VAT)
(RRP: £1,492.80) You save: £52.80!
Backorder Available
Contact us for lead time
Schoeps CCM 21 L Wide Cardioid Compact Microphone
Schoeps CCM 21 L Wide Cardioid Compact Microphone
Schoeps CCM 21 L Wide Cardioid Compact Microphone
Schoeps CCM 21 L Wide Cardioid Compact Microphone
Schoeps CCM 21 L Wide Cardioid Compact Microphone

Schoeps CCM 21 L Wide Cardioid Compact Microphone

£1,440.00 (£1,200.00 Exc. VAT)
(RRP: £1,492.80) You save: £52.80!
Backorder Available
Contact us for lead time
Brand: SchoepsModel: CCM 21 L
+
Key Features:
  • Wide cardioid & consistent directionality
  • Warm pleasant sound image
  • Often used as a spot microphone,
  • Also used as the main pair for overall stereo pickup
See More...
S-SCH-CCM21
Information

What's In The Box:


1 x CCM 21 Microphone
1 x L 5 LU Adapter Cable (5m)
1 x SCG Clip

Schoeps CCM 21 L Wide Cardioid Compact Microphone

This type of microphone has a directional pattern between omni and cardioid. The basic idea in designing the CCM 21 was to combine the advantages of the cardioid with those of the omni. This results in a pickup pattern which blends the two sets of characteristics in a useful manner. It has fuller and more extended low frequency response than a cardioid, with less proximity effect, while attenuating side- and rear-incident sound less than a cardioid.

The polar diagram shows the directivity of the MK 21 to be only slightly dependent on frequency. This contrasts with omnidirectional capsules, whose directivity increases with rising frequency, and with cardioids (at least smaller ones), which tend to accentuate high frequencies that arrive at oblique angles. The MK 21's orientation is less critical than with a cardioid, since direct sound arriving on axis and reverberant or other sounds off axis are both reproduced accurately. This lack of coloration in the off-axis pickup produces a "warm" and natural sonic impression.

Features

  • Wide cardioid with especially consistent directionality throughout its frequency range
  • Pleasant sound image, often described as “warm”
  • Often preferred for use as a spot microphone, or as the main pair for overall stereo pickup

Please note

This is the standard Lemo version.

Specifications

Specifications

Frequency range 30 Hz - 29 kHz with CMC 6 / CMR
30 Hz - 44 kHz with CMC 6xt
Sensitivity -37 dB (V/Pa), 14 mV/Pa with CMC 6
Equivalent noise level (A-weighted) 13 dB with CMC 6
Equivalent noise level (CCIR) 23 dB with CMC 6
Signal-to-noise ratio (A-weighted) 81 dB with CMC 6
Maximum sound pressure level (THD < 0.5 %) 131 dB-SPL with CMC 6
Maximum output voltage 2,6 V (8,3 dbV) with 2 kΩ load
Low cut filter 20 Hz, 12 dB/Okt.
Output impedance 90 Ω @ 1 kHz
Maximum cable length > 400 m
SCHOEPS RFI Shield No
Powering standard / Valid range P48 / > 40 V
P12 / > 10 V
Current consumption 4 mA (P48)
3,6 mA (P12)
Common mode rejection ratio (at 1 kHz) > 55 dB
Minimum recommended load impedance 2 kΩ
Output Lemo (CCM-L) or XLR-3M (CCM-K),
analog, 1 channel
Length 46 mm (CCM-L)
Diameter 20 mm
Weight 45 g (CCM-L)
Surface finish matte gray
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers