Audio Cables
.jpg)
- A wide selection of UMP-OUT cables
- Cables range from TA3F to 5 different output variations
- All cables are approximately 16cm in length
- Featuring integrated capacitors to suppress HF interferences
- Miniature microphone cable with a MicroDot connector
- Cable length is 1.8 m (5.9 ft)
- Available Options: 1.6mm diameter cable or 2.2mm diameter cable
- Available in black
- Cable Kit for 20′ Mighty 6 section boompole (KP20)
- Right-Angle, Low Profile 3-pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- 5m or 10m active extension cable
- Designed for Schoeps Colette series capsules and amplifiers
- 3 mm thin, robust, tear-resistant cable
- Special sheath makes this cable torsion-proof
- Straight 2m cable with XLR 4-Pin female connector
- Copper cable with coiled segment
- Designed for HMD 300 PRO, HMD 301 PRO
- & HMD / HME 26-II, HMD / HMD 27 PRO
- Designed to connect 3-pin LEMO lavalier mics to a 3.5mm mic input
- For the TRACK E Timecode Audio Recorder from Tentacle Sync
- Connector 1: 1x 3-Pin LEMO, Connector 2: 1x 3.5mm Mini Jack
- Cable Length: 14 cm (End-to-End Length), Weight: 12 g
-1.jpg)
-1(1).jpg)
-1(2).jpg)
- Uses Mogami® cable and an ultra-slim XLR housing
- It is a cable for suspension or minimal visual appearance
- Adding only a few millimeters extra length to the microphone
- Available in two lengths: 10m (DAO4010) and 20m (DAO4020)
-1.jpg)
- Can be combined with any modular capsule in the Pencil Microphones Series
- Ultra-transparent preamp with active drive to help reject RF interference
- Splits into a 12mm housing and a 3-Pin XLR connector at 3 meters
- Available as a Rear Exit Cable (MMP-ER) or Side Exit Cable (MMP-ES)
-1.jpg)
-1(1).jpg)
-1(2).jpg)
- An ultra-transparent preamp to combine with any DPA modular capsule
- Features a MicroDot connector, providing ultimate flexibility
- Attach your favorite Pencil Microphone Capsule to a wireless solution
- Available with a rear extending cable or with a side extending cable
.jpg)
- Custom made to connect P48 boom mics to the Zaxcom ZMT3 miniature transmitter
- This cable features Neutrik and Lemo brand connectors
- With high quality low diameter, yet durable cable
- Cable length is approximately 45cm “boot to boot”
- Cable Kit for the 10′ Mighty 5 section boompole (KP10V)
- Right-Angle, Low Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Cable kit for the 12' Mighty 5 section boompole (KP12)
- Right-Angle, Low Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
Load More