DPA CORE+ 4061 Omni Lavalier Microphone - Loud SPL

£444.00 (£370.00 Exc. VAT)
In stock now
DPA CORE+ 4061 Omni Lavalier Microphone - Loud SPL
DPA CORE+ 4061 Omni Lavalier Microphone - Loud SPL

DPA CORE+ 4061 Omni Lavalier Microphone - Loud SPL

£444.00 (£370.00 Exc. VAT)
MicroLock
3-Pin Lemo
TA5
3.5mm (Sennheiser)
In stock now
Brand: DPA MicrophonesModel: 4061-OP-C-B90
+
Key Features:
  • Experience the same great sensitivity with even more clarity at higher SPLs
  • Effectively negates microphone distortion across the entire dynamic range
  • Achieves an even higher peak SPL taking your sound to the next level
  • Not only technically measurable, but also audibly noticeable
See More...
S-DPA-4061-OP-C-B90
Information

DPA CORE+ 4061 Omni Lavalier Microphone - Loud SPL

CORE+ takes your miniature mic to the next level, neutralizing distortion across the entire dynamic range. MicroLock – A dependable, secure locking microphone connector with limitless flexibility and reassuring reliability.

Removing these remnants of distortion allows sound engineers to capture a new level of audio clarity easily and efficiently, so they can shape an extraordinary listening experience for the audience.

Features of CORE+

  • Experience the same great sensitivity with even more clarity at higher SPLs
  • Effectively negates microphone distortion across the entire dynamic range
  • Captures the purest, clearest sound at the source
  • Lets sound engineers focus on shaping an extraordinary experience for the audience
  • Reduces hassle from unpredictable challenges in the live show environment
  • Achieves an even higher peak SPL taking your sound to the next level
  • Not only technically measurable, but also audibly noticeable

What's new for the CORE+ 4061?

  • Total harmonic distortion increased to < 0.5% THD 136 dB SPL peak, < 1% THD 139 dB SPL peak
  • Max sound pressure level increased to 10% THD 144 dB SPL peak
  • Same great sensitivity and sound characteristics at even higher SPLs

Distortion free...

Microphones with CORE+ deliver crystal clear, distortion-free sound across the entire dynamic range of the microphone. Anyone seeking the highest possible sound quality will appreciate CORE+.

Whether recording or amplifying content, the sound will remain clear and completely undistorted by the microphone, even when the talent speaks or sings at louder volumes.

...from high to low SPL

Especially at higher sound pressure levels and with multiple microphones on stage, the elimination of distortion will enhance the overall clarity and transparency of the entire sound image.

For miniature microphones in particular, sound professionals in theatres and film industry are the primary beneficiaries.

Neutralizing distortion

Microphones with CORE+ provide even more clarity across the entire dynamic range, from low to high sound pressure levels.

Based on our own renowned CORE by DPA technology, CORE+ elevates our extraordinary mics to a completely new level. While CORE allows mics to handle higher SPLs without significant artifacts up to 1% THD, CORE+ eliminates those artifacts completely.

The image above shows that we have pushed distortion down to an absolute minimum across the entire dynamic range. The flatness of the curve at all sound levels shows that it is not distortion, but only system noise. 

Specifications

Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarised condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range ±2 dB Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz.
High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
Distortion, THD < 0.5% 133 dB SPL RMS, 136 dB SPL peak
Distortion, THD < 1% 136 dB SPL RMS, 139 dB SPL peak
Dynamic range Typ. 111 dB
Max. SPL, THD 10% 144 dB SPL peak
Rated output impedance 30 - 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V - max. 10 V through DPA adapter.
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector MicroLock, MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Weight 7.5 g (0.26 oz) incl. Cable and MicroLock connector
Microphone diameter 5.4 mm (0.21 in)
Microphone length 12.7 mm (0.5 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroLock pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
Sensitivity selection tolerance (at 1 kHz) ±1.5 dB
Colours Black, Beige, Brown, White
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers