Hawk-Woods NP1-XLR4S NP1 Power Distribution Shoe w/ 4-Pin XLR (Select Option)

The NP1 Power distribution shoes are designed to be paired with any NP1 battery, to provide more flexible powering solutions to a sound bag or cart setup. These products go by a number of different names: NP1 Shoe / Cup / Sled / Distro / Adapter. They come in a number of different variations, explained below. There are four different powering connectors available: Hirose, XLR, TA4 and 2.1mm DC Jack.

There are four different variations of shoe available:

• NPA: The most basic of all the NP1 shoes, featuring an unregulated output from a single flying lead, in this case with a 4-Pin XLR connector.
• NPB: Featuring four switched auxiliary 4-Pin XLR outputs, fused and fitted with a low battery voltage indicator. Also features a single flying lead with a 4-Pin XLR connector. The orientation of the NPB protects the switches from accidental knocks and any additional power cables from strain when placed vertically in a sound bag.
• NPC: Features all the benefits of the NPB range but in a slightly different configuration. The orientation of the adapter is designed to provide a slimmer profile and greater accessibility to the switches and any additional power cables when used vertically in a sound bag.
• NPU: Features all the benefits of the NPB, with the addition of fully regulated outputs and a voltage selector for switching between 9.6 and 12 volts. The adapter is also orientated to be stood on vertically in a sound bag with the battery parallel to the connectors to prevent strain on any additional power cables, whilst the switches remain on the other side to allow easy access to the switches.

If you're still unsure which variation is suitable for you, please refer to the product images when selecting a variant, as this may help visualise the differences.

Product Codes:

• NPA-XLR
• NPB-XLR4S
• NPC-XLR4S
• NPU-XLR4S