Receiver Accessories
.jpg)
.jpg)
- Bottom plate adapter kit for Unislot® camera slots
- Such as those provided on Ikegami® and Panasonic® cameras
- The rear panel DB25 connector is wired for power and audio connections
- Includes DB25 rear panel, spacer bezel / flange, gasket & screws set
- The Lectrosonics SREXT is a connector panel adapter kit
- Provides freedom of using the SR Receiver on standard, non slot-in mount scenarios
- Two TA3-male jacks for balanced output and a power jack with a locking connector
- Compatible with the Lectrosonics SRB/E01 Dual Channel Block 606 Receiver
-Universal-Slot.jpg)
- The Lectrosonics SRUNI is a wireless audio module mounting kit for Unislot cameras
- The unit houses the SR dual-channel wireless microphone receiver,
- freeing the operator from carrying the device in their pocket or on a belt
- Compatible with the Lectrosonics SRB/E01 Dual Channel Block 606 Receiver
.jpg)
.jpg)
.jpg)
.jpg)
- Double wireless receiver pouch
- Effortlessly holds two receivers at the same time
- Easily attaches to any ORCA Audio Mixer Bag (except OR-28/280)
- Attaches with the secure 180 degree locking system
.jpg)
- Shoe mount adapter for the EW series camera mountable receivers
- Allows users to mount the receiver to an accessory shoe
- Ideal for cameras or booms, providing a secure mount
- A standard 3.5mm locking minj-jack and unbalanced XLR male connections
- Specifically designed for connecting the Evolution series portable EK receivers
- to the audio inputs on Beta Cameras, mixers, amplifiers, etc.
- Length: Approx. 60cm
- For the Axient Digital ADX5D dual-channel portable wireless receiver
- For slot-in connector situations such as professional broadcast cameras
- DB25 D-Sub connector type for audio and power
- Designed for use with with SuperSlot and UniSlot devices
- TA3 Backplate for the Axient Digital ADX5D portable wireless receiver
- 2 x TA3 analog outputs
- Output 1 can be configured as two-channel AES3 digital outputs
- 1 x 4-pin power connector for battery sled use
.png)
.png)
.png)
.png)
.png)
- Changes orientation of TX screen
- Audio Ltd 25 Pin D-Type Uni/Superslot adapter
- Designed for the A10-RX & A20-RX
- Includes mounting plate
- Sound Devices A-Plate Mounting Plate Spacer for A-SL
- Mounting plate spacer for A-SL
- Included is the plate only
- Audio Ltd 25 Pin D-Type Uni/Superslot adapter
- Designed for the A10-RX or A20-RX
- Includes mounting plate
- Half-wave end-fed dipole VHF (169-220MHz) antenna
- Features a swivel-mount BNC
- Designed for A20-Nexus and A20-Nexus Go receivers
- Enable them to use the VHF frequencies 169-220 MHz
Load More
Featured Radio Mics
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
- Low-noise, studio-grade balanced input for microphones and line level inputs
- Integrated digital audio recorder with ultra-accurate timecode generator
- Records to removable microSD cards
- Simultaneous wireless transmission and recording
-1.jpg)
-1(1).jpg)
-1(2).jpg)
- Digital Hybrid Wireless® with compatibility modes for use with other transmitters
- Tracking front-end filters for high performance in tough RF environments
- SmartSquelchTM DSP-controlled, noise based filtering and squelch
- IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
.jpg)
.jpg)
.jpg)
- Robust bodypack receiver delivering clarity along the whole frequency spectrum for daily use on stage.
- Easy and flexible wireless synchronization between transmitter and receiver via infrared.
- Compatible with Sennheiser WSM control software for flexible frequency allocation.
- Up to 16 compatible channels.
.png)
.png)
.png)
- Accepts up to four, two-channel wireless receivers
- Audio output on analogue/AES3 and Dante
- Built-in power distribution & antenna distribution
- Compatible with select Audio Ltd, Lectrosonics & Wisycom
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
- Worldwide tuning range of 470MHz – 1525MHz with the A20-RX
- Full remote control of the Mini via A20-Remote companion app
- Full 10 Hz – 20 kHz audio bandwidth; 100% digital RF modulation and transmission
- Built-in 32-bit float, 48kHz recorder w/ 64GB storage for 80~ hours of record time