Remote Audio SpeakEasy R1 Rack Mountable 12V Stereo Speaker
The SpeakEasy™ R1 is a self-contained, stereo, 12VDC powered speaker system built into a single rack space. Its low current draw (55mA at idle) and compact light-weight enclosure make the SpeakEasy R1 ideal for remote audio production, yet the R1 has the volume needed for use in facility equipment rooms.
The R1’s line level inputs are for standard line-level signal ratings of -10dbV to +4dBu, or the signal from a stereo headphone jack. Two XLR inputs allow for a stereo input signal. In addition, an XLR / “¼” combo jack allows for a stereo input signal on the 1/4″ connector, allowing a single cable to feed the SpeakEasy R1. This provides a convenient way to insert the SpeakEasy™ R1 into an existing cart setup with a headphone feed from a mixer using a ¼” TRS to TRS cable. Two DC input connectors are provided for convenience: a 4-pin XLR (Pin 4: V+, Pin 1: Gnd) and a 2.1mm coaxial-type DC jack (center pin positive). The SpeakEasy R1 will operate on 9 – 20VDC. An external 12VDC “wall-wart” power supply (Remote Audio PS12V1.5) is available.
The main power push-button is located on the front of the SpeakEasy R1, and will illuminate when pressed and sufficient power is present at either of the DC input jacks. The main volume control and source selector knob apply to the main speakers, as well as the headphone connector. When headphones are inserted into the front ¼” jack, the main speakers are muted. The source selector allows monitoring of: Left input only; Right input only; Stereo; or a summed Mono version of the Left and Right inputs.
Features
- Self-contained, stereo, 12VDC-powered speaker system
- Single rack space
- Dual XLR and stereo 1/4" input
- Front headphone jack
- Master volume control
- Input monitoring selector
Hire Equipment
We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.
Weekly Rental
For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.
Shipping
If shipping is required, we require a two day minimum hire period, with a travel day inbetween.
Cancellations
Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.
Insurance
Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".
