Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders

£2,380.00 (£1,983.33 Exc. VAT)
(RRP: £2,634.00) You save: £254.00!
Out of stock
Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders
Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders
Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders
Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders
Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders
Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders

Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders

£2,380.00 (£1,983.33 Exc. VAT)
(RRP: £2,634.00) You save: £254.00!
Out of stock
Brand: Sound DevicesModel: SL-2 (6449)
+
Key Features:
  • Compatible with the 833, 888, and the Scorpio
  • Supports up to 8 channels of audio
  • Accepts two UniSlot or SuperSlot wireless receivers
  • Built-in antenna distribution with powering for active antennas or boosters
See More...
S-SDV-SL-2
Information

What's In The Box:


1 x SL-2 Wireless Module
1 x Set of bagged items for 8-Series
1 x Set of bagged items for Scorpio
2 x Promo stickers
1 x Product info sheet
1 x Product catalog

Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer / Recorders

Streamline your bag with the SL-2 Dual SuperSlot Wireless Module. This two slot-in wireless receiver integration system easily mounts to the top panel of any 8-Series mixer-recorder. UniSlot and SuperSlot™ wireless receivers from a variety of manufacturers are accepted, including Audio Ltd, Lectrosonics, Wisycom, and Sennheiser. The SuperSlot protocol supports up to four channels of wireless audio per slot.

An 8-Series mixer-recorder supplies power to the SL-2 and slotted-in receivers – no external DC connector needed. Analog or digital audio is sent from the receivers into the mixer-recorder via the expansion port, reducing messy cabling for power and audio connectivity. The SL-2 offers antenna distribution to slot-in receivers, spreading out the placement of antennas for better RF performance. The rear panel of the SL-2 is equipped with two TA3 connectors for an additional four inputs of AES3 audio and two 4-pin Hirose DC Outputs, each supplying up to 500 mA for powering additional equipment.

Features

  • Compatible with the 833, 888, and the Scorpio.
  • Supports up to 8 channels of audio.
  • Accepts two UniSlot or SuperSlot wireless receivers from Audio Ltd, Lectrosonics, Sennheiser, and Wisycom.
  • Built-in antenna distribution with antenna powering for active antennas or boosters.
  • Supports remote control of third party smart antennas.
  • Two auxiliary MCX antenna ports for connecting other receivers or RF distribution.
  • Two TA3 AES3 inputs for 4 channels of digital audio.
  • Two DC Outputs via Hirose 4-pin connectors, each supplying up to 500 mA.
  • Powers via an 8-Series mixer-recorder.
  • Accepts either analog or digital audio from slot-in receivers.
  • Ability to set and monitor multiple functions of a SuperSlot-compatible receiver from the 8-Series mixer-recorder.
  • RF Scan with visual representation of the RF spectrum.
  • Monitor transmitter battery, receiver audio, and RF levels.
  • Rugged, lightweight, and compact design.
  • Mounts to the top of any 8-Series mixer-recorder.
  • Same width as the 833.

Which SuperSlot receivers are supported by SL-2? 

SuperSlot is an open standard. Wireless receivers from several manufacturers are supported, allowing you to use your favorite brand, as well as leveraging your existing transmitter and receiver investment:

  • Audio Ltd A10-RX
  • Lectrosonics SRb (with audio board update from Lectrosonics)
  • Lectrosonics SRc
  • Lectrosonics SRc-941
  • Lectrosonics SRb5P and SRc5P (Slot A only)
  • Sennheiser EK-6042
  • Sony DWR-S03D (in future firmware update)
  • Wisycom MCR42 (with SLK42-IKSS rear panel adapter from Wisycom)
  • Wisycom MCR54 (in future firmware update)

Answers to any more FAQ's can be found on Sound Devices' Website.

Specifications

Specifications

Powering All power supplied by host 8-series machine
SL-2 idle power draw 1.3 W (without receivers or antenna)
Antenna Impedance 50 ohms
Antenna Powering 12V at 200 mA, menu selectable on/off
Serial remote control, Wisycom-compatible for ADFA and LFA powered antenna etc.
Antenna Pre-select Filters Menu selectable:
Wideband/bypass (low pass filter, 1.7 GHz upper cut-off)
470-614 MHz
542-694 MHz
606-770 MHz
770-960 MHz
1240-1260 MHz
Input RF Attenuators 0 to -1 8dB, in 6 dB steps, menu selectable
RF Outputs Auxiliary Antenna Outputs for additional receiver
DC Outputs 1-2 500 mA max (each), 6-18 VDC passed through from host 8-series machine, depending on power source. Hirose 4-pin connector: pin 4 = +, pin 1 = ground.
AES Inputs Two pairs for a total of four channels, AES-3 balanced, 110 ohms, TA-3 connectors
Dimensions H x W x D
4.5 cm x 21.3 cm x 13.1 cm
(1.8 in x 8.4 in 5.1 in)
Weight 1.35 lbs (unpackaged)
0.61 kg (unpackaged)
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers