RTS OMS Intermediate Digital Partyline Main Station

£5,929.44 (£4,941.20 Exc. VAT)

Available in 5-10 days

RTS OMS Intermediate Digital Partyline Main Station

RTS OMS Intermediate Digital Partyline Main Station

£5,929.44 (£4,941.20 Exc. VAT)

Connector4-Pin XLR Female

4-Pin XLR Female

4-Pin XLR Male

5-Pin XLR Female

Available in 5-10 days

Brand: RTSModel: OMS Advance A4F

–

Key Features:

Bridges analog and digital intercoms, supporting 20 belt packs and 16 party lines
Supports analog 4-wire, 2-wire (echo cancellation), and digital interfaces
Connects up to 4 keypanels with up to 20 digital beltpacks supported
Includes stage announce, expansion ports, and an intuitive front panel

S-RTS-OMS-INTERMED-4F

Copy URL

Information

RTS OMS Intermediate Digital Partyline Main Station

OMS (OMNEO Main Station) is the beginning of a new era of intercom systems called RTS Digital Partyline. This powerful single system bridges legacy analog partyline users who wish to migrate to digital functionality while using their existing equipment. Furthermore, OMS connects both wired and wireless intercom products. OMS represents an incredibly versatile and easy-to-use solution for a wide range of applications – a communications multi-tool for theaters, houses of worship, industrial, broadcast and event venues.

Features

Supports up to 20 OMNEO or ROAMEO belt packs and up to 16 party lines. Ethernet connectivity through copper or fiber connections available.
Supports 4 ports of analog AIO 4-wire and 4 ports of analog 2-Wire (RTS / Audiocom / Clear-Com formats supported). Auto nulling capability (echo cancellation) available on 2-Wire interfaces.
Supports up to 4 keypanels (any mix of analog/OMNEO) depending upon product licensing. (Maximum 4 analog)
Includes stage announce output and additional OMNEO expansion audio ports reserved for connecting and networking with other OMS units. These expansion ports allow additional system capacity and partyline capability as part of a distributed system.

Using OMNEO, OMS interconnects with our digital matrix products including keypanels, ROAMEO wireless and digital beltpacks. OMNEO is an architectural approach to connecting devices that need to exchange information such as audio content or device control (Dante & control). In addition, it can serve as a stand-alone base station for ROAMEO, RTS’s digital wireless communication solution based upon DECT.

The OMS is available in five licensed models; Analog Only, Analog Plus, Basic, Intermediate and Advanced. The OMS allows for increased capacity and functionality as business needs grow.

The OMS has the easy-to-use RTS digital icon-based front panel display, along with a simplified menu structure to allow system configuration and control from the front panel and display.

Main Station Feature Table

	Digital
Feature	OMS Basic	OMS Intermediate	OMS Advanced
Analog two-wire ports (RTS/Audiocom/CC)	0	4	4
2W loop tdru	N/A	Yes	Yes
Program inputs	2	2	2
Stage announce	1	1	1
GPI / relay	4 GPI / 4 Relays	4 GPI / 4 Relays	4 GPI / 4 Relays
2W auto-nulling	N/A	Yes	Yes
# of conferences	16	16	16
2W Mixing / routing	No	Yes	Yes
Four-wire AIO ports	No	4 ports	4 ports
Audio expansion (tie lines)	8 ports	8 ports	8 ports
Built-in line powering	No	No	No
Max OMNEO device connections	20	20	40
Digital beltpacks supported	20	20	40
ROAMEO beltpack supported	0	20	40
RVON ports	0	0	4
KP capacity	4	4	8
Fiber support	No	Yes	Yes

Specifications

Power Supply Type	Locking IEC 320 C14 style connector
AC Input	100 VAC – 240 VAC, 60/50 Hz, 0.46 A / 0.24 A
Maximum Power Consumption	30 W (based on 120 VAC)
Operating Temperature	32° F – 113° F (0° C – 45° C)
Storage Temperature	-4° F – 158° F (-20° C – 70° C)
Dimensions	19" w/ rack ears (17.56" w/o rack ears) W x 1.7" H x 7.72" D (including connectors)
Weight (OMS Chassis)	5.29 lbs (2.4 kg)
AIO 4-Wire Analog Connectors	4 RJ-45 connectors
Signal Format	Differential RX/TX audio with differential RS-485 control data
Wiring Scheme	Both 568B & USOC supported
A/D and D/A Resolution	24 bits
Max Input Level (balanced)	+20 dBu w/o clipping
Digital Input Gain	Programmable (-20 dB – +20 dB)
Input Frequency Response	+1 dB/-3 dB from 100 Hz – +20 kHz
THD+N (8dBu input, unity gain)	0.025% non-weighted@1 kHz, <0.075% non-weighted, 100 Hz – +20 kHz
Nominal Input Impedance	>22 kΩ
Nominal Output Level	8 dBu
Digital Output Gain	Programmable (-20 dB – +20 dB)
Maximum Output Level (balanced)	20 dBu w/o clipping
Output Frequency Response	+1 dB / -3 dB from 100 Hz – +20 kHz
Output Noise Floor	<-65 dBu
Crosstalk Isolation	>80 dB
PGM1 & PGM2 (3-pin XLR-F)	Signal Format: Differential RX/TX audio, A/D Resolution: 24 bits
SA (Stage Announce) (3-pin XLR-M)	Signal Format: Differential RX/TX audio, D/A Resolution: 24 bits
2-Wire Party Line Analog Connector	four 3-pin female XLR connectors
Modes/Port Supported	RTS CH1, RTS CH2, Audiocom (4 channel), Clear-Com (4 channel)
4W/2W Echo Return Loss	>45 dB
Unbalanced Operation (RTS/Clear-Com)	Expected Termination Impedance: 200 Ω, Noise Contribution: <-70 dBu
THD+N (with nominal input)	<0.5%, 200 Hz – 7.3 kHz
Bridging Impedance	>10 kΩ
CALL Signaling	20 kHz (RTS mode), 12 VDC (Clear-Com mode)
MIC KILL Signaling	24 kHz (RTS mode)
Balanced Operation (Audiocom)	Expected Termination Impedance: 300 Ω, Noise Contribution: <-70 dBu
THD+N (with nominal input)	<0.5%, 200 Hz – 7.3 kHz
Bridging Impedance	>10 kΩ
CALL Signaling	20 kHz (Audiocom mode)
MIC KILL Signaling	24 kHz (Audiocom mode)
General Purpose Input/Output Ports Relays	SPDT, Contacts: Common (C), Normally Closed (NC), Normally Open (NO), 1A @ 30 VDC
Inputs	Optically Coupled, Input Voltage: 5 VDC – 12 VDC on A+
Control Port Connector	RJ-45, Format: IEEE 802.3 compliant, Speed: 10/100/1000 Mbps
OMNEO Port (Primary and Secondary)	Maximum Capacity: 48 Full-duplex ports, Copper Connector Type: RJ-45
Fiber Connector Type	Small Form Factor Pluggable (SFP), Multimode: Finisar FTLF8519P3BNL, Single Mode: Finisar FTLF1421P1BTL
Fiber Speed	100/1000Mbps
LED Indicator	Optical Signal Present
RVON	Details to be included later

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

Full Name

Existing Customer

Yes

Email Address

Contact Number

Please provide your contact telephone number.

Product(s) for Hire

Please provide the name and model of the product(s) you are enquiring about hiring.

Hire Length (Dates)

What is the date range that you are looking to hire this/these product(s) for?

Message

Please add the two numbers

Quick Links

Quick Info

Office Hours

Office Address

RTS OMS Intermediate Digital Partyline Main Station

RTS OMS Intermediate Digital Partyline Main Station

RTS OMS Intermediate Digital Partyline Main Station

Features

Main Station Feature Table

Specifications

Hire Equipment

Weekly Rental

Shipping

Cancellations

Insurance

Quick Links

Quick Info

Office Hours

Office Address

RTS OMS Intermediate Digital Partyline Main Station

RTS OMS Intermediate Digital Partyline Main Station

Related Products

RTS OMS Intermediate Digital Partyline Main Station

Features

Main Station Feature Table

Specifications

Hire Equipment

Weekly Rental

Shipping

Cancellations

Insurance